Electric Compact Shelving Computer-controlled, with a multi-functional file rack control system, meeting the requirements of modern, digital, and standardized archive management. Combining contemporary advanced software, information, and control technologies, electric compact shelving has emerged. Since its market launch, it has been well-received by customers.

　　Each row of electric compact shelving is equipped with a locking switch at the top or bottom end, and a mechanical lock master switch is installed between adjacent rows. When the entire row group is closed, first use the key to open the main locks on both sides. Ensure that the locking switch of each column is in the ON position before stopping the rocking operation. The locking switch of a row should be in the open position during daily operation, unless two or more people are retrieving files, in which case the switch of the compact cabinet should be switched to the closed position to fix a certain row of compact cabinets in the closed position. Avoid pinching on the track. The electric compact frame is chain-driven. For long-term use, the sprocket can be lubricated to extend its service life. Warehouses with electric compact shelving installed should pay attention to ventilation. The surface of the compact shelving should not be exposed to sunlight. Keep them clean and free of debris.

　　As a replacement for traditional compact shelving, electric compact cabinets have higher technological content, a user-friendly human-computer interface, good connection with the database, facilitating upgrades to the control information system structure, and integrating the main functions of manual, electric, and computer internal control. Intelligent file query methods and file storage location indication serve as a good helper for file management personnel.

　　Maintenance

　　Packaging: Products should be suitable for normal transportation on any means of transport and should avoid damage and rain and snow during transportation. Storage: Packaged products should be stored in a dry and ventilated indoor warehouse, and should be stacked to prevent pressure loss and avoid contact with corrosive substances and gases.

　　1. The electric compact shelving traveling mechanism uses chain drive. After a period of operation, the gear body can be lubricated by opening the bottom layer to add lubricating oil to the sprocket and bearings.

　　2. The warehouse where the electric compact shelving is installed should be dry and well-ventilated.

　　3. The surface of the frame should not be exposed to sunlight for extended periods.

　　4. The grooves of the guide rails should be kept clean and free of debris.

　　5. Do not use gasoline, spirits, rosin, or banana water to clean the sprayed surface, as this will cause the sprayed surface to lose its luster and fade.

　　Electric Compact Shelving Product Performance

　　1. Reliable center straightness, stable and lightweight body.

　　2. Uses a folding crank handle.

　　3. Load-bearing capacity: >600kg/m3.

　　4. Cabinet space utilization rate: >80%.

　　5. Transmission: Institutional fully automatic separation drive.

　　6. The transmission control system can use a special chain, double-row adjustable center rolling bearings, and the rollers use high-strength cast iron material. The transmission mechanism rotates flexibly, smoothly, and powerfully.

　　7. Each column of the cabinet structure is equipped with a braking device to ensure the personal safety of inspection personnel.

　　 Electric Compact Shelving Made of cold-rolled steel plate. There are strong magnetic metal rubber sealing strips between the frame structures, a dustproof plate is installed on the top, and a rodent-proof device is installed at the bottom.